School Bus Inspection Endorsement

Class is limited to the first 8 to register

The completion of this course will certify you through the Oklahoma State Department of Education to inspect Oklahoma Public School Buses.
Upon completion of this program, you will receive your Oklahoma State Department of Education School Bus Certification. You will need to keep the certificate as proof of your qualifications.

In order to qualify as a Public School Bus Inspector, you must submit this application AND documentation to demonstrate your qualifications as outlined in Oklahoma Administrative Code (OAC) and Title 49 of the Code of Federal Regulations (CFR) below. Incomplete applications will not be considered.

OAC 210: 30-5-6(c)(2):
Any person may be qualified to perform the annual school bus inspections by submitting proof that they
meet one or more of the following qualifications:

I.) Two years’ experience as an automotive technician and certification by the Automotive Service
Excellence (ASE) in medium-heavy truck brake, transit bus brake, school bus brake, medium/heavy
truck preventive maintenance inspection, or transit bus preventive maintenance inspection; OR

II.) Any person qualified to perform inspections under the Federal Motor Carrier Safety Act, appendix G and accompanying regulations at 49 CFR 396.19 will be qualified to inspect any school bus except the brakes. Persons qualified to inspect brakes under 49 CFR 396.25 shall be qualified to inspect the brakes on any school bus. Documentation of one years’ experience inspecting school buses is required.

Fill out the forms:

School Bus Inspection Endorsement--CLICK HERE

2019 School Bus Inspector Application--CLICK HERE



Available Classes

BF22-005 Enroll Now

 Burns Flat

 7/16/2022 - 7/16/2022
  S  M  T  W  T  F  S 

 8:00am - 4:00pm

Tuition 150 or 75

Additional Notes: $75 for OSAC member districts and $150 for non-member